新的超宽带监管框架欧洲ieee80218rr标签

Date:11 November 2022 Authors: UWB emission masks and related mitigations / requirements forUWB below 10,6 GHz Assessment of ECC/DEC/(06)04 and ECC/DEC/(07)01 11/2022 General casebased on ECC/DEC/(06)04 The technical requirements below arenotapplicable to: devices and infrastructure used at a fixed outdoor location or connected to a fixed outdoor antenna;devices installed in flying models, aircraft and other aviation;devices installed in road and rail vehicles. Vehicular applicationsbased on ECC/DEC/(06)04 SPECIFIC RADIODETERMINATION,LOCATION TRACKING, TRACING ANDDATA ACQUISITION APPLICATIONS IN 6-8.5 GHz; Annex: Sensor UWB Regulation Limits for contact based UWB material sensingdevices; based on ECC/DEC/(07)01 Contact-based sensors and imaging devices. The UWB transmitter is only switched on when in direct contact with the material under investigation; November 2022 ECC/DEC/(07)01, table 1; Limits for contact based UWB material sensing devices All emissions (e.i.r.p) & mitigations will be tested based on a “test scenario” reflecting the intended use(EUT in contact with representative material) as specified in the related specific EN Limits for non-contact based UWB material sensingdevices; based on ECC/DEC/(07)01 Non-contact-based sensor and imaging devices. The UWB transmitter is only switched on when in close proximity with the investigated material and theUWB transmitter is directed into the direction of the material under investigation (e.g. manually, by using aproximity sensor or by mechanical design). November 2022 ECC/DEC/(07)01, table 1; Limits for non-contact based UWB material sensing devices All emissions (e.i.r.p) & mitigations will be tested based on a “test scenario” reflecting the intended use(EUT in contact with representative material) as specified in the related specific EN