国际足联足球进球质量计划-测试手册2026

FIFA QUALITY PROGRAMMEFOR FOOTBALL GOALS FULL-SIZE SOCKETED FOOTBALL GOALS,FULL-SIZE MOBILE FOOTBALL GOALS TEST MANUAL 3.5Exposed corners androunded edges –FIFA TestMethod 04123.6Frame entrapment – FIFATest Method 05133.7Determination of strength– FIFA Test Method 0614Table 1: vertical load categories forstrength testing153.8Determination of stability 04. 4.1Summary of requirements 02. 4.2Summary of requirements 4.3Summary of requirementsfor futsal goals 03. Whilst every effort has been made to ensure theaccuracyof the information contained in this test manual,any partywho makes use of any part of this test manual(a“User”) does so at their own risk and shall indemnify FIFA,its officers, directors, servants, consultants and agentsagainst all claims, proceedings, actions, damages, costs, FIFA certification that are deemed to be in breach ofany mandatory safety requirements shall have their This test manual details the test methods and requirementsthat must be fulfilled in order to gain FIFA productcertification for full-size socketed football goals, full-sizemobile football goals and futsal goals. Adherence to therequirements detailed in this document does not constitute As part of FIFA’s strategy to develop the game and toprovide guidelines for its stakeholders, the FIFA QualityProgramme has developed this test manual to test full-sizesocketed football goals, full-size mobile football goals andfutsal goals. As with the other areas that come under the This test manual uses test methods and designrequirementslisted in EN 748:2013+A1:2018 andEN16579:2018, developed by the European Committeefor Standardization/Technical Committee 136/22, as a basis The FIFA Quality Programme for Football Goals (full-sizesocketed football goals, full-size mobile football goals andfutsal goals) relates to the certification of specific productsthat have fulfilled the requirements of the tests outlined It should be noted that if the product fails the initial test,thetest institute is still required to prepare and submitaFIFA product test report to notify FIFA of the failure. The design and construction of the goal product andany component or attachment thereof submitted to aFIFA-accredited test institute for assessment must beidentical to those that feature in the final retail product. The detailed process for becoming a FIFA licensee canbe found in the Application Guide on the FIFA Quality 2.1ADMINISTRATION As well as requiring the submission of all of the relevantproduct documentation, the test application must includethe product declaration, which must contain writtenassembly, installation and maintenance instructions, Once successfully tested, the product is certified fora four-year period and, provided that the contractualrequirementsare fulfilled,is published on theFIFA Quality Programme Resource Hub. Licensees are alsoable to display their product(s) with the relevant FIFA QualityProgramme mark(s) on their own website and channels. In 2.2TESTING The manufacturer is responsible for the installation ofthe goal unless otherwise agreed with the test institute.If possible, goals should be tested in a laboratoryenvironment. This testing should involve a goal net and Upon the expiry of the certification or the modificationof the goal (design, components, materials, etc.), a retest Once installed, the test institute carries out the testingoutlined in this manual and compiles a test reportcontaining the details of the test and confirmation ofeither a pass or fail result. The uploaded test report is impairs the taking of an accurate measurement,arigid board with an approximate length and widthof 500mmx500mm may be placed on the surface 3.1NORMATIVE REFERENCES This test manual incorporates dated reference provisionsfrom other publications. For dated references, subsequentamendments to, or revisions of, any of these publications d)Repeat the height measurement at 100mm±10mmfrom the inner side of the left post, again using a flat datum board (if required). Record the value asHl. 3.2GOAL DIMENSIONS – FIFA TEST METHOD 01 Expression of results Principle All measurements must be recorded to the nearestmillimetre. The variation between each height and widthmeasurement must also be noted in the results report. The inner height and width of the goalmouth are measuredat multiple locations to test dimensional compliance. Apparatus •A laser distance-measuring device or staff capableof measuring to an accuracy of at least±2mm over a)Measure the width of the goalmouth betweenthe inner edges of the goalposts at a heightof 100mm±10mm above the playing surface(fornatural turf, use the top of the soil as the playing b)Repeat the measurement, again measuringfrom the inner edge of the goalpost at a height c)Measure the height of the goal opening from theplaying surface(for natural turf, use the top ofthesoil as the playing surface; for filled artificialgrass, usethe top of the infill; and for non-filled artificial g