制造工艺介绍

Reviewed 2025 © 2020-2025 Micron Technology, Inc. All rights reserved. Information, products, and/or specifications are subject to change without notice. All information isprovided on an “AS IS” basis without warranties of any kind. Statements regarding products, including statements regarding product features, availability,functionality, orcompatibility, are provided for informational purposes only and do not modify the warranty, if any, applicableto any product. Drawings may not beto scale. Micron, the Micron logo, and other Micron trademarks are the property of Micron Technology, Inc. All other trademarksare the property of theirrespective owners. Copyright guidelines By using any content provided by the Micron Educator Hub, you acknowledge that Micron Technology, Inc. (“Micron”) is the soleowner of the content andagree that any use of the content provided by the Micron Educator Hub must comply with applicable laws and require strict compliance with these Guidelines: 1.Credit shall be expressly stated by you to Micron for use of the content, including any portion thereof, as follows:a.“©2020-2025Micron Technology, Inc. All Rights Reserved. Used with permission.”2.You may not use the content in any way or manner other than for educational purposes.3.You may not modify the content without approval by Micron.4.You may not use the content in a manner which disparages or is critical of Micron, its employees, or Micron’s products/services.5.Permission to use the content may be canceled/terminated by Micron at any time upon written notice from Micron to You if Youfail to comply with theterms herein.6.You acknowledge and agree that the content is provided by Micron to You on an “as is” basis without any representations or warranties whatsoever, andthat Micron shall have no liability whatsoever arising from Your use of the content.Micron shall ensure that the content does not violate any statutoryprovisions and that no rights of third parties are infringed by the content or its publication. Otherwise, liability of the parties shall be limited to intent andgross negligence.7.You acknowledge and agree that the content is the copyrighted material of Micron and that the granting of permission by Micron to You as provided forherein constitutes the granting by Micron to You of a non-exclusive license to use the content strictly as provided for herein and shall in no way restrict oraffect Micron’s rights in and/or to the content, including without limitation any publication or use of the content by Micronorothers authorized by Micron.8.Except for the above permission, Micron reserves all rights not expressly granted, including without limitation any and all patent and trade secret rights.Except as expressly provided herein, nothing herein will be deemed to grant, by implication, estoppel, or otherwise, a license under any of Micron’s otherexisting or future intellectual property rights. How to cite sources from the Micron Educator Hub •Micron is committed to collaborate witheducators to make semiconductor memory educationresources available through theMicron Educator Hub•The content in the Micron Educator Hub hasbeen identified by Micron as current andrelevant to our company•Please refer to the table on the right forproper citation Table of Contents 1Goals, Objectives and Target Audience2Introductionto Fabrication3BasicCMOS Process Flow (Traveler)4Glossary5DocumentUpdates Introduction to Fabrication-Goal and Objectives In this introductory course participants will learn the basics of semiconductor fabrication at the wafer level. Objectives: 1.Become familiarwith generalterms used in semiconductormanufacturing2.Understand the purpose of theten differentfabareas that supportmanufacturing:1)Photolithography2)Dry Etch3)Wet Process4)Chemical Mechanical Planarization5)Chemical Vapor Deposition6)Physical Vapor Deposition7)Diffusion8)Implant9)Metrology10)Real-time Defect Analysis 3.Understandthe step-by-step fabrication process for basic CMOS technology Target Audience •This Introduction to Fabrication module covers the basics ofsemiconductor fabrication at the wafer level. Pro tip Everyone interviewing at Micron canuse this presentation to prepare forthe interview by learning foundationalinformation about memory. Check outthe candidate guides for Engineering,Technician and Business roles. •Interns, NCGs (New College Grads), and new employees in technicalroles need to understand these concepts •Examples of critical target audience roles at Micron that utilize theseconcepts: –Process Technicians–Equipment Technicians–Process Engineer–Equipment Engineer–Process Integration Engineer–Product Engineer–Characterization Engineer –Yield Enhancement Engineer–Test Engineer–Probe Engineer–Reliability Engineer–Quality Engineer–Design Engineer–Verification Engineer •Micron engineering candidate guide•Micron technician candidate guide•Micron business candidate guide Introduction toFabrication Fabrication Fabricationi